-
Igwe ọkụ na-ekpochapụ friza aluminom foil
The friza aluminum foil heater na-eji wepụ fogging na ntu oyi si n'ọnụ ụzọ na mmiri tray na refrjiraeto, na na na.The kpo oku akụkụ na ụzọ waya nwere ike họrọ High ugboro ịgbado ọkụ akara ma ọ bụ roba isi (lelee foto).
-
Igwe na-ekpo ọkụ na-ekpochapụ friza
The defrost kpo oku tube dayameta nwere ike mere 6.5mm,8.0mm,10.7mm,etc.Defrost okpomọkụ ogologo na ụzọ waya ogologo nwere ike ahaziri, anyị defrost kpo oku tube na ụzọ waya ejikọrọ akụkụ na-achichi site silicone roba, otú a nwere kasị mma waterproof ọrụ karịa shrinkable tube.
-
Ihe mkpuchi mkpuchi mkpuchi silicone maka ngwa nbipute 3D nwere nrapado 3M
1. silicone kpo oku pad maka 3D ngwa nbipute e mere ka n'ezie udi akụkụ, gụnyere 3D geometry dabara gị akụrụngwa.
2. Silicone roba kpo oku ute na-eji mmiri na-eguzogide silicone roba kpo oku ute na-enye ogologo okpomọkụ ndụ.
3. silicone rubber pad pad na nrapado 3M, dị mfe itinye na ịrapara n'akụkụ gị, site na vulcanization, adhesives, ma ọ bụ ngwa ngwa.
-
Igwe na-ekpo ọkụ Aluminom Foil Heater Defrost Foil Heater maka friza
Aluminom defrost foil okpomọkụ Ọdịdị:
1. Ụdị ahụ na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ na-ekpo ọkụ na-ekpuchi PVC na-ekpuchi elu nke aluminom foil. Ala ala nke foil aluminom nwere ike ịbịa na nrapado nwere mmetụta nrụgide maka mado dị mfe.
2. The silicone roba kpo oku waya etinye n'etiti abụọ aluminum foil na nrụgide mmetụta nrapado. Ala ala nke foil aluminom nwere ike ịbịa na nrapado nwere mmetụta nrụgide maka mado dị mfe.
-
Igwe rọba silicone na-ekpochapụ ụlọ oyi na-ekpo ọkụ
The Cold Room Drain Heater ogologo nwere ike mere 0.5M ka 20M, na ike nwere ike mere 40W / M ma ọ bụ 50W / M, ụzọ waya ogologo bụ 1000mm, na agba nke igbapu ọkpọkọ kpo oku nwere ike họrọ, red, blue, ọcha (ụkpụrụ agba) ma ọ bụ isi awọ.
-
Indesit refrigerator Aluminom Foil Defrost Heater 70W C00851066
The aluminum foil defrost heater model number is C00851066, ngwugwu bụ otu okpomọkụ na otu akpa, 100pcs otu katọn. The defrost ike bụ 70W, anyị nwere ike ahaziri aluminum foil heater dị ka ndị ahịa chọrọ.
-
Na-ekpochapụ Fiberglass braid kpo oku waya
The defrost kpo oku waya nwere fiberglass braid, waya dayameta bụ 3.0mm, defrost waya kpo oku waya na ụzọ waya ogologo nwere ike ahaziri dị ka chọrọ.The ike na voltaji nwekwara ike ahaziri.
-
Igwe na-ekpo ọkụ Fiberglass dị elu dị elu maka igwe nju oyi
The fiberglass defrost Heating waya ogologo nwere ike ahaziri dị ka ndị ahịa chọrọ, na waya dayameta nwere ike họrọ 2.5mm,3.0mm,4.0mm, na na na.The ụzọ waya ogologo bụ 1000mm.
-
4.0MM PVC kpochapu waya kpo oku maka friza
The okpukpu abụọ oyi akwa PVC defrost kpo oku waya 's ogologo na waya dayameta nwere ike ahaziri, waya dayameta anyị nwere 2.5mm,3.0mm,4.0mm na on.The ogologo, edu waya, ọnụ nlereanya nwere ike mere dị ka chọrọ.
-
Silicone roba refrigerator ọnụ ụzọ okpokolo agba na-ekpochapụ waya
The refrigerator Door Frame Defrosting Wire Heater bụ nke a na-eji maka friza ọnụ ụlọ oyi na-ekpo ọkụ, enwere ike ịhazi nkọwa ndị na-ekpo ọkụ na-ekpo ọkụ dị ka ihe ndị ahịa chọrọ.
-
Silicone Rubber Defrost Door Frame Na-ekpo ọkụ waya
The defrost ụzọ etiti waya okpomọkụ dayameta nwere ike họrọ 2.5mm,3.0mm,4.0mm na on.The ogologo nke defrost kpo oku waya nwere ike ahaziri dị ka ndị ahịa chọrọ.
-
Silicone Rubber Aluminom Braided Defrost Wire Heater
Igwe ọkụ ọkụ eletrik na-eji ihe na-eguzogide ọkụ eletrik dị ka isi iyi ọkụ ma kpuchie ya na ihe mkpuchi dị nro na oyi akwa dị n'èzí, nke a na-eji emepụta ngwa ụlọ dị iche iche maka ọkụ inyeaka.
